Temperature Controllers, as the name suggests, are used to control temperature. GIC manufactures ON/OFF Temperature Controllers that follow a very simple principle. To elaborate on the principal, after a set point is fixed for heating control, the output is switched on when the temperature is below the set point and switched off when it is above the set point to keep the temperature at a desired level.
- Universal Input
- Flush Mounting Version 48x48 mm with Dual Line Digital Seven Segment Display
- Configurable Output combination
- Configurable: Band, Deviation, Sensor break & Loop break alarms
- Single/Dual acting PID controllers with 4 Control modes
- Auto-tuning PID with provision for Soft-Start
- 6 Segment (3 Ramp & 3 Soak) with Power Failure resumption modes
- RS 485 Communication
- IP 20 (for Terminals & Enclosure), IP 40 (for Front Panel only)
- Timer functionality with settable time from 1min to 9999 min
Supply Voltage
110 - 240V AC/DC
Frequency
50/60 Hz
Control Action
ON/OFF, PID
Temperature Sensors / Inputs
Thermocouple (J, K, E, S, B, R), RTD (PT100 - 3 wire compensation), Analogue signal DC (0-50 mV, 0-60 mV, 12-60 mV)
Measurement Accuracy
+/-0.5% PT100, +/-1% TC & mV signals
Resolution
0.1°C RTD, J, E; 1°C S, B, K, R; 0.001°C mV signals
Configurable Set Points
4
Display
Dual row 7 segment, LED indications, 4-digit process value, 4-digit set value
Output
Relay 1: SPST 5A @ 240 VAC / 28 VDC; Relay 2: SPST 5A @ 240 VAC / 24 VDC; SSR: 12 VDC, 24 mA, Short Circuit Protection
Operating Temperature
0°C to +50°C